Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice16 61181041L3-5AMenu NavigationBasic menu navigation is accomplished by selecting the desired option number and thenpressing E NTER. To return to the previous menu, press the E SC (escape) key. To access theSystem Help screen, press S HIFT and the question mark (?) key.General Keyboard CommandsTable 6 shows the general keyboard commands for the DS3-PSM.Hot KeysTable 7 shows the menu specific hot keys for the DS3-PSM.Table 6. General Keyboard CommandsKeyboard Command DescriptionBACKSPACE This keyboard command is used to delete the character to left of thecursor during keyboard input.ENTER (or Return) This keyboard command is used to terminate input.CTRL+R (Control and r) This keyboard command is used to refresh the display.CTRL+Z (Control and z) This keyboard command is used to force the terminal menu displayto the top level.ESC (Escape) This keyboard command is used to clear partial input, or returns tothe previous menu if there is no partial input.Table 7. Menu Specific Hot KeysHot Key DescriptionDS3 Timing and ProvisioningL This hot key is used to display the “Loop Direction Buffer, CAC, & Policing OptionsMenu”.P This hot key is used to display the “Shelf # Slot # Port # Buffer, CAC, & Policing OptionsMenu”. The Shelf/Slot/Port must be input before the menu will display.S This hot key is used to display the “System Buffer, CAC, & Policing Options Menu”.W This hot key is used to display the “WAN Direction (Network) Buffer, CAC, & PolicingOptions Menu”.ATM Provisioning (PORT) MenuH This hot key is used to display the next shelf in the series.I This hot key is used to display the “ILMI Provisioning Screen”.P This hot key is used to display the next port in the series.S This hot key is used to display the next slot in the series.
