Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice54 61181041L3-5AThe ATM Provisioning Screen - Shelf # Slot # Port # menu hot keys are shown in Table 27.15 Neighbor IP Address This option is used to set and display the Neighbor IPAddress in the format of xxx.xxx.xxx.xxx.The IP address of the neighbor system connected to the far-end of this interface, to which a Network Management Sta-tion can send SNMP messages, as IP datagrams sent to UDPport 161, in order to access network management informa-tion concerning the operation of that system.16 PNNI port options This option displays the “ATM Provisioning Screen - Shelf #Slot # Port # (PNNI Port Options) Menu” on page 55.17 Restore Factory Defaults This option is used to restore the provisioning options forthe selected port to the following factory default values:• Port ID:• Service Mode: Out of Service-Maintenance• Port Tx Rate: 0• Port Rx Rate: 0• Port Type: UNI• Scrambler: Disabled• Maximum VCCs: 32• Maximum VPCs: 32• Maximum VPI Bits: 8• Maximum VCI Bits: 9• Physical Address:• Neighbor Name:• Neighbor IP Address: 0.0.0.0Table 27. ATM Provisioning Screen - Shelf # Slot # Port # Menu Hot KeysHot Key DescriptionH This hot key is used to display the next shelf in the series.I This hot key is used to display the “ILMI Provisioning Screen” on page 57.P This hot key is used to display the next port in the series.S This hot key is used to display the next slot in the series.Table 26. ATM Provisioning Screen - Shelf # Slot # Port # Menu Options (Continued)Option Description Function
