5-50container Commandscontainer extend volumeTo extend a volume set by adding freespace to it, use thecontainer extend volume command. The file system on thevolume set remains intact and can be extended to include the addedspace.Command And Switch AvailabilityThis command and its associated switches (if any) are supported onthe following operating systems: Windows NT Windows 2000 (basic disk only) Windows XP (basic disk only)Syntaxcontainer extend volume {container}[{free_space}] [{free_space}...]Parameters{container}Specifies the ID number (0 to 63) of the array (volume set) toextend.{free_space}Specifies the SCSI device and its associated freespace used toextend the specified array (volume set). See the scsi_devicesection on page 3-7 for more information on how to specify theSCSI device. See the free_space section on page 3-8 formore information on how to specify the freespace.{free_space}...Specifies a SCSI device or devices and associated freespace orfreespaces used to extend the specified array (volume set). Youcan specify a maximum of 16 freespace elements. If you exceed16 freespace elements, the command displays an appropriateerror message.
