5-54container Commandscontainer listTo display information about one or all arrays on the controller, usethe container list command. The display contains suchinformation as the container’s ID number and other usefulinformation. Typically, you use the container list command toobtain specific information about arrays prior to using other array-related commands.Syntaxcontainer list [/all{=boolean}] [/full{=boolean}][{container}]Parameters{container}Specifies the ID number (0 to 63) of the array whoseinformation you want to display. To display information aboutall of the arrays on the system, omit the ID number from thecommand.Switches/all{=boolean}Specifies whether to list all arrays on the system. If you specifyTRUE, the command displays all arrays on the system. If youspecify FALSE, the command displays only the array youspecify in the command.This switch defaults to FALSE if you specify a container.Otherwise, the switch defaults to TRUE./full{=boolean}Specifies whether to display detailed information. If youspecify TRUE, the command displays detailed information. Ifyou specify FALSE, the command does not display detailedinformation.This switch defaults to FALSE.
