NetWareUNIX WindowsOS/2MacintoshSection 9: Management & Configuration AXIS 1620 User’s Manual120Using FTPHaving assigned an IP address to your AXIS 1620, as described inAssigning an IP address on page 26, you can change the AXIS 1620parameter settings using the File Transport Protocol (FTP).Editing the config file Follow the instructions below to edit the config file using FTP:1. Log in to the AXIS 1620 by typing:ftp or ftp in a DOS window(Windows and OS/2) or in a UNIX shell window.2. Enter the user id and the password. (The default entries are rootand pass.)3. Download the config file to your host by typing:get config4. Edit the file using your preferred text editor.5. Save the config file to the AXIS 1620 by typing:put config CONFIGNotes: ❏ It is important that the destination file is specified in capitalletters. Otherwise the edits are temporary and will be lost once theAXIS 1620 has been powered down.❏ To edit the config file from a Macintosh you will need FTPsupport such as MacTCP, Fetch or Anarchie. The procedure forediting the file is the same as described above.The example on the next page shows how to edit the config file usingFTP from a DOS window.