NetWareAXIS 1620 User’s Manual Section 4: Setting Up - NetWare 43Notes: ❏ If the PSERVER_NDS parameter includes the name of a tree andnot a specific file server, RCONSOLE (RCONAGG in NetWare5x) must be running on at least one file server in the specified tree.❏ If the IPX and IP transport protocols are enabled in your network,you can use AXIS NetPilot to install the AXIS 1620 and toconnect print queues. Please refer to Basic Setup with AXISNetPilot, on page 22 and Advanced Installation using AXISNetPilot, on page 39.❏ Pure IP requires that you run NetWare 5 or higher.PSERVER_NDSparameterAs shown in the instructions in Installing the AXIS 1620, on page 42,the PSERVER_NDS parameter specifies which NDS tree or file serverthe AXIS 1620 will login to. It also specifies the path to the printserver object in the tree. The syntax of the PSERVER_NDS parameteris displayed in the following examples:Example 1:TREE:NW5_TREE DevDept.acmeIn this example a print server named DevDept, with context acme,will login to the tree, NW5_TREE.Example 2:171.16.2.249 DevDept.acmeIn this example a print server named DevDept, with context acme,will login to a file server with the IP address 171.16.2.249. If you havea DDNS server on your network you can replace the IP address withthe host name.
