NetWareUNIX WindowsOS/2MacintoshAXIS 1620 User’s Manual Section 3: Basic Installation 33Using RARP in UNIX Follow the instructions below to set the IP address using RARP:1. Append the following line to your Ethernet Address table. This istypically located in the /etc/ethers file:Example:2. Update, if necessary, your host table and alias name databases, asrequired by your system.3. If it is not already running, start the RARP daemon. This istypically performed using the rarpd -a command.4. Restart the AXIS 1620 to download the IP address.Notes: ❏ If the host name has not been mapped to an IP address, simplyreplace the host name entry with the IP address in the exampleabove.❏ If you are using IBM AIX, you will probably not have access to aRARP daemon. If this is the case, you can use either the ARP orBOOTP methods instead. 00:40:8c:10:00:86 npsname
