NetWareSection 4: Setting Up - NetWare AXIS 1620 User’s Manual42Basic setup in Pure IP NetworksIn the NetWare Pure IP environment, you must use NetWareAdministrator to create the printer, print server and queue objects.Installing theAXIS 1620Follow the instructions below to install the AXIS 1620 in the NetWarePure IP environment:1. Start the Configuration Wizard from the User mode in the AXIS1620 Web interface.2. Click your way through the Wizard until reaching the NetWarepage. Make sure that the PSERVER_NDS parameter is set. If youwant to change the parameter value or if the parameter value isempty, enter the desired values. The parameter value must includethe tree or the preferred file server you want to login to and theprint server name including the context. The syntax of thePSERVER_NDS parameter is described in PSERVER_NDSparameter, on page 43.3. Use NetWare Administrator to create and link the printer, printserver and queue objects in the NDS tree.4. Use the Add Printer Wizard to install the printer on your client.Note that only NDS queue based PSERVER printing issupported.Any configuration and management of the AXIS 1620 can beperformed from any standard Web browser. Please refer to Using a WebBrowser, on page 100.In Pure IP environments, the AXIS 1620 supports NDS queue basedPSERVER printing or NDPS printing. Refer to Printing Methods, onpage 44 alternatively Setup using NDPS, on page 36.