WindowsAXIS 1620 User’s Manual Section 5: Setting Up - Windows 5711. Select the printer driver you want to install and click Next>.12. Enter an appropriate name for your printer and click Next>.13. Choose whether you want to share the printer with other networkusers and click Next>.14. Choose whether you want to produce a test page and then clickFinish.Using the MicrosoftLPD monitor withWindows NT 4.0This section describes how to set up a Windows NT Server v4.0 forLPR printing over the TCP/IP protocol, using the built-in MicrosoftLPD monitor.Basic Setup If you have not already done so, you should perform the TCP/IP basicsetup procedures prior to installing a printer for LPD printing. Theseprocedures are defined in Assigning an IP address, on page 26 andonwards.Preparing forLPR/LPD printingIn the Control Panel, click the Network icon. If the TCP/IP Printingentry appears, then TCP/IP is already installed. Close the Networkfolder and skip to Installing a printer on the next page.Follow the following steps to prepare for LPR/LPD printing:1. Open the Control Panel and click the Network icon.2. Select Protocols.3. Add TCP\IP Protocol.4. Select Services.5. Add MS TCP\IP Printing.
