Axis 1620 User Manual

Contents

WindowsAXIS 1620 User’s Manual Section 5: Setting Up - Windows 53Windows NT4.0 and Windows 2000Installing TCP/IPPrinters in WindowsNT 4.0/2000Install the AXIS Print System software on your Windows NT 4.0 orWindows 2000 workstation, if you have not already done so. AXISPrint System can be downloaded from the AXIS Online CD or fromthe Axis WWW home page at http://www.axis.com/.To enable printing in the TCP/IP environment, you must ensure thatthe TCP/IP protocol is enabled on your client.The set of instructions you should use to install TCP/IP printer portsis dictated by the IP address of your AXIS 1620:• If you have an active DHCP server on the network or if you havealready set the IP address of the AXIS 1620 using anothermethod, you should follow the installation instructions presentedin Installing TCP/IP Printer Ports, on page 55.• If your AXIS 1620 is not assigned with a valid IP address, youshould follow the installation instructions presented in InstallingTCP/IP Printer Ports and Setting the IP Address, on page 53.Installing TCP/IPPrinter Ports andSetting the IP AddressFollow the instructions below to install an AXIS Raw TCP/IP printerport and set the IP address of the AXIS 1620, using AXIS PrintSystem:1. Start AXIS Print System by selecting AXIS Print System from theStart menu.2. AXIS Print System starts. Select Search for newly connected printserver... and click Next>.3. Read the instructions and click Next>.