NetWareUNIX WindowsOS/2MacintoshAXIS 1620 User’s Manual Appendix B: The Parameter List 145Appendix B The Parameter ListThis appendix provides an overview of the AXIS 1620 parameters.Please refer to the AXIS Network Print Server Technical Reference fora complete description of the parameters. Alternatively, you can accessthe Axis WWW Home Page at http://www.axis.com/, where you candownload the latest technical information.The Config File The left-hand column shows the parameters and their default values asthey appear in the config file and the right-hand column shows thename of the parameters as they appear in the internal Web pages.After you have changed them, most parameters take effect for the nextprint job. If Requires Restart appears in a parameter description, youmust restart the AXIS 1620, before the new setting for that parametertakes effect.Please refer to Section 9 Management & Configuration, on page 99, formore information about how to change the parameters.Note: ❏ The password parameters, ROOT_PWD and PROS_PWD onlyappear when you are logged in to the AXIS 1620 using root. Thepassword parameters will not be printed when you are printingthe parameter list using the test button.--- GENERAL MENUNODE_ADDR. : 00 40 8C 10 00 86 Node AddressPS_NAME. : AXIS100086 Print Server Name (100086 are the last six digits of the serial number)ROOT_PWD. : pass Root PasswordUSERS. : User and Printer Access ListBASE_URL. : www.axis.com Base URLAXIS_PRINT_SYSTEM.: YES (YES, NO) Enable compatibility with AXIS Print SystemDEF_OUT. : PR1 (PR1, PR2, PR3, PR4,PR5, PR6, PR7, PR8, LPT1)Internal Printout DestinationSYS_LOC. : System LocationSYS_CONT. : System Contact