MacintoshAXIS 1620 User’s Manual Section 7: Setting Up - Macintosh 81Setting Parameters In AppleTalk, you can change a limited number of the parameters ofthe AXIS 1620. You can:• enable and disable binary data transfers for your printing• select the type of binary transfer protocol to use• specify the AppleTalk printer type• set the IP addressHowever, by assigning an IP address to your AXIS 1620, you haveaccess to all of print server’s parameters via any standard Web browseror via FTP. Refer to Section 9 Management & Configuration, on page99 for more information.Example: The following example describes the how you set the AXIS 1620parameters in AppleTalk.Important: DO NOT use the parameter values from this example whenconfiguring your AXIS 1620. You should select values that areappropriate for your printers and network settings.Follow the instructions below:1. Open the Chooser.2. Select a network printer driver, any LaserWriter will do.3. Select the printer port which name ends with "_CFG".4. Close the Chooser.5. Open a text editor, e.g. SimpleText.
