Becker Online Pro 7800 Operating Manual

Also see for Online Pro 7800: Update Installation guide

Contents

Becker Online Pro 7800 Operating Manual Manual pdf 30 page image

120Using NavigationThe current time is displayed. After 8 seconds, thesystem returns to the route guidance display.The clock settings can be accessed by pressing andholding the right rotary control . See ”Settingtime” on page 124.Requesting current positionDuring route guidance, the current position can berequested.Press multifunction button .The current position, with street name (if availa-ble), latitude and longitude, elevation above sealevel (in 50 m increments) and the number of sat-ellites received will be displayed.Pressing the right rotary control will return youto the route guidance display.Press multifunction button , to store the cur-rent position in the ”last destination” memory.Return to the route guidance display by pressingthe right rotary control or waiting a short time.Calling up traffic announcementsAll the traffic announcements received or thoserelevant for the route can be called up.Press the multifunction button . All receivedtraffic announcements will be displayed.Press the multifunction button . The trafficannouncements relevant for the route are dis-played.If no traffic announcements are available, the mul-tifunction buttons and are not dis-played.The list is sorted. The list displays warning mes-sages (e.g. wrong-way drivers) first, followed bytraffic problems (e.g. accidents) and lastly trafficproblems due to road construction.If more than one traffic problem exists on a road,the number of problems is shown by 2x..., 3x...etc.To display the entire text of the traffic announce-ments, select the desired entry with the right rotarycontrol .Traffic announcements will be shown for the se-lected road.If several announcements (e.g. 3) have been re-ceived, the individual announcements are indi-cat-ed by 1/3, 2/3 and 3/3. The announcementsdisplayed can be scrolled through by turning theright rotary control .The announcements can also be read out. For thispurpose, press the right rotary control for morethan 2 seconds.Pressing the right rotary control returns to thelist of traffic announcements.Note:If the reception of traffic announcements is notpossible for technical reasons, or willbe shown in the display.