Managing the Hub2-47The SmartSwitch 2000 Chassis ViewUPS IDDisplays the manufacturer and model typecode of the UPS attached to the COMport of the SmartSwitch 2000. You must assign this typecode for the UPS windowto be active. (See Setting the UPS ID, on page 2-48, for instructions for setting thetypecode for your UPS.) The valid typecodes are:• Model 370• Model 400• Model 600• Model 900• Model 1250• Model 2000• Matrix 3000• Matrix 5000• SU 700• SU 1400• SU 2000XL• OtherUPS UptimeDisplays the number of hours that the UPS has been operating since the last timeit was started up.Line VoltageDisplays the voltage coming through the line attached to the SmartSwitch 2000.Battery OutputDisplays the amount of battery output voltage.Battery CapacityDisplays the percentage of remaining battery capacity (100% indicates a fullycharged battery).Test ResultsDisplays the result of the last self-test performed by the UPS. The possible testresults are:Unit OK The UPS unit is in working order.Unit Failed The UPS unit has failed the self-test. Check theunit for damage or consult your UPS User’sManual.Bad Battery The UPS unit battery is bad.No recent test No UPS self-test has been performed in the lastfive minutes.Unit in test... The UPS is currently in test mode.Please standby
