The SmartSwitch 2000 Chassis View2-70Managing the HubSetting Port Operational ModesTo assign a port operational mode (dot1dTrunk, dot1QTrunk, or hybrid) to a porton your 802.1Q switch:1. In the VLAN Port Config window’s list box, click to select a port to which youwish to assign a port operational mode.2. In the Port Operational Mode field, click to select the desired operationalmode.3. Click the Apply button. The selected mode will be reflected in the list box forthe selected port.Setting Port Frame Discard FormatsTo assign a frame discard format (discardTagged, discardUntagged, ornoDiscard) to a port on your 802.1Q switch:1. In the VLAN Port Config window’s list box, click to select a port to which youwish to assign a frame discard format.2. In the Port Discard field, click to select the desired frame discard format.3. Click the Apply button. The selected mode will be reflected in the list box forthe selected port.Updating VLAN Port Config Window InformationClicking the Refresh button will update the information displayed in the 802.1QVLAN Port Assignment list without closing the window.Performing Egress List Configuration802.1Q VLAN switching allows each port on a switch to transmit traffic for any orall defined VLANs on your network. During egress list configuration, youdetermine which VLANs are on each port’s egress list. See Egress List Operation,on page 2-62 for details on egress lists.Egress list configuration operations are performed using the VLAN Egress PortConfig window. To launch the window:1. Click on Device in the Chassis View menu bar to display the Device menu.2. Click on 802.1Q VLAN, and then select 802.1Q VLAN Egress Port Config.The VLAN Egress Port Config window, Figure 2-26, will appear.
