Managing the Hub2-67The SmartSwitch 2000 Chassis ViewEnabling and Disabling VLANsTo enable or disable VLANs:1. Select the desired VLAN entry in the Configured VLANS list box.2. In the VLAN Admin field, click to select Enable or Disable.3. Click the Apply button. The selected VLAN will be enabled or disabled,depending on your selection.Updating VLAN Config Window InformationClicking the Refresh button will update the information displayed in theConfigured VLANs list without closing the window.Performing Ingress List Configuration802.1Q VLAN port assignment and ingress list configuration operations areperformed using the VLAN Port Config window, which is accessed from theDevice menu in your switch’s Device View. See Ingress List Operation, onpage 2-62 for details on ingress lists. To launch the window:1. Click on Device in the Chassis View menu bar to display the Device menu.2. Click on 802.1Q VLAN, and then select 802.1Q VLAN Port Config. TheVLAN Port Config window, Figure 2-25, will appear.NOTEUnless Enable is selected when a VLAN is initially defined, it is disabled by default. Anew VLAN that is left in a Disabled state will remain disabled until a port is assigned toit, at which time it will be automatically enabled. If you are changing a VLAN’s portassignment, the VLAN should be disabled before changing the port configuration. SeePerforming Ingress List Configuration, on page 2-67, for details on completing yourVLAN port configuration.
