The mode you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next feature availableon your vehicle.Auto Exit SeatIf your vehicle has the optional memory package,you will have this feature. When this feature is turnedon, you can recall any previously programmed exitposition for the driver’s seat when the key is removedfrom the ignition and the driver’s door is opened.Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory,it was programmed to Mode 2. The mode to which thevehicle was programmed may have been changedsince it left the factory.To program the vehicle to a different mode, use thefollowing procedure:1. Enter the personalization portion of the SETUPmenu following the instructions listed previously.2. Scroll to AUTO EXIT SEAT using the TUNE/SELknob to highlight it.3. Press the TUNE/SEL knob to switch back and forthbetween on and off.When the mode is turned on, a check mark willappear in the box next to the feature name.The mode you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next feature availableon your vehicle.Twilight DelayThis feature allows you to set the amount of time youwant the exterior lamps to remain on after you exitthe vehicle.Programmable ModesMode 1: 0:00 secondsMode 2: 0:15 secondsMode 3: 0:30 secondsMode 4: 1:00 minuteMode 5: 1:30 minutesMode 6: 2:00 minutesMode 7: 2:30 minutesMode 8: 3:00 minutes3-78
