Finish CareOccasional waxing or mild polishing of the vehicleby hand may be necessary to remove residue from thepaint finish. GM-approved cleaning products can beobtained from your dealer. SeeVehicleCare/Appearance Materials on page 5-95.The vehicle has a “basecoat/clearcoat” paint finish.The clearcoat gives more depth and gloss to the coloredbasecoat. Always use waxes and polishes that arenon-abrasive and made for a basecoat/clearcoatpaint finish.Notice: Machine compounding or aggressivepolishing on a basecoat/clearcoat paint finish maydamage it. Use only non-abrasive waxes andpolishes that are made for a basecoat/clearcoatpaint finish on your vehicle.Foreign materials such as calcium chloride and othersalts, ice melting agents, road oil and tar, tree sap, birddroppings, chemicals from industrial chimneys, etc.,can damage the vehicle’s finish if they remain on paintedsurfaces. Wash the vehicle as soon as possible. Ifnecessary, use non-abrasive cleaners that are markedsafe for painted surfaces to remove foreign matter.Exterior painted surfaces are subject to aging, weather,and chemical fallout that can take their toll over aperiod of years. To help keep the paint finish lookingnew, keep the vehicle in a garage or covered wheneverpossible.Windshield and Wiper BladesIf the windshield is not clear after using the windshieldwasher, or if the wiper blade chatters when running,wax, sap, or other material may be on the bladeor windshield.Clean the outside of the windshield with a glass cleaningliquid or powder and water solution. The windshield isclean if beads do not form when it is rinsed with water.Grime from the windshield will stick to the wiper bladesand affect their performance. Clean the blade bywiping vigorously with a cloth soaked in full-strengthwindshield washer solvent. Then rinse the bladewith water.Check the wiper blades and clean them as necessary;replace blades that look worn.5-92
