Registering an Avoid Point/AreaTo store an avoid point/area, do the following:1. Touch Register Avoid Point/Area.2. Enter a location. See Enter Destination onpage 4-28.3. If desired, reduce or enlarge the area around thepoint you want to avoid by using the REDUCE orENLARGE screen buttons.If an avoid point cannot be avoided, the system willdisplay “Avoid Point and Area Stored. RouteMay Not Avoid the Avoid Point and Areas.”4. Touch Enter to set the area as an avoid point area.When using the REDUCE or ENLARGE buttons, abox will appear to represent the area or an X willappear to represent the area avoided. When anavoid point is set, the square will appear as green.5. Touch Return to go back to the previous screen.Editing an Avoid Point/AreaTo edit an avoid point/area, do the following:1. Touch Edit Avoid Point/Area. A list of avoidedpoints will appear.2. Select the avoided point/area you want to change.A map of the avoided area will appear.3. Use REDUCE or ENLARGE to edit the avoidedpoint.4. Touch Enter to set your new avoided area.The system will display “Area Adjusted.”5. Touch Return to go back to the previous screen.Deleting an Avoid Point/AreaTo delete an avoid point/area, do the following:1. Touch Delete Avoid Point/Area. A list of avoidedpoints will appear.2. Select the avoided point/area you want to delete.3. The system will ask you to confirm your selection.Touch Yes to delete the avoid point/area or No tocancel.If Yes is selected, the area will no longer beavoided when traveling on a planned route.4. Touch Return to go back to the previous screen.4-27
