Voice RecognitionThe navigation system’s voice recognition allows forhands-free operation of navigation and audio systemfeatures. Voice recognition can be used when theignition is on or when Retained Accessory Power (RAP)is active.This feature only works if the map DVD is inserted andI AGREE has been selected. If you try to use voicerecognition without the map DVD inserted, the systemwill display “Please insert the navigation map DVDto use the voice recognition feature.” See “Installing theDVD Map Disc” under Maps on page 4-39.To use navigation voice recognition, do the following:1. Push and hold the talksymbol steering wheelcontrol until youhear a beep. The audiosystem will mute.2. Clearly state one of the commands listed on thefollowing pages. For example, say “FM1”.3. The system will tell you the command beingimplemented. For example, the system will say“FM1 Radio” and change the audio system to theFM1 source.You can end voice recognition by not speaking anycommands. After about five seconds of silence,the system will automatically cancel voice recognition.At times, the system may not understand a spokencommand. If this happens, try saying the commandagain. If a spoken command is not available, the systemwill provide feedback based on availability.While using voice recognition, make sure to keep interiornoise levels to a minimum. Otherwise, the system mightnot recognize voice commands.The system will only recognize commands spoken inEnglish.4-76
