Sound MenuTouch SOUND at the bottom of the main audio screen,source menu, or DSP menu to change the tone, DSP,if equipped, fade, and balance for all sources. The audiosystem has a separate setting for these features foreach source preset. However, the audio system keepsone fade and one balance setting for all audio sources.To adjust sound settings, do the following:1. Touch the plus (+) or minus (−) signs to adjusttreble, mid-range, and bass.2. Touch the L for left or R for right to adjust thebalance of the speakers.3. Touch the F for front or R for rear to adjust the fadeof the speakers.4. Touch DSP to adjust your DSP, if equipped. See“Adjusting the Speakers” later in this section formore information.After adjustments are made, touch any source screenbutton. This will take you back to the preset stationmenu. Whenever you touch that screen button,the previously stored information you have entered foreach preset station will be recalled.To adjust the tone for each preset, do the following:1. Press the BAND key.2. Touch AM, FM1, FM2, XM1, XM2, or WX, ifequipped, to access the desired preset screen.3. Touch SOUND.4. Touch the plus (+) or minus (−) signs to adjusttreble, mid-range, and bass.5. Touch Return to exit. This will take you to thepreset station menu.6. Touch and hold one of the six preset screen buttonsfor more than two seconds until you hear a beep.Whenever you touch that preset for less thantwo seconds, the station and previously storedinformation you have entered for each preset stationwill be recalled.7. Repeat the steps for additional presets.4-60
