6. To tighten the belt, push down on the child restraint,pull the shoulder portion of the belt to tighten the lapportion of the belt and feed the shoulder belt backinto the retractor. If you are using a forward-facingchild restraint, you may find it helpful to use yourknee to push down on the child restraint as youtighten the belt.7. Push and pull the child restraint in differentdirections to be sure it is secure.If the airbags are off, the off indicator in the passengerairbag status indicator will come on and stay onwhen the vehicle is started.If a child restraint has been installed and the onindicator is lit, turn the vehicle off. Remove the childrestraint from the vehicle and reinstall the child restraint.If, after reinstalling the child restraint and restartingthe vehicle, the on indicator is still lit, check to makesure that the vehicle’s seatback is not pressing the childrestraint into the seat cushion. If this happens, slightlyrecline the vehicle’s seatback and adjust the seatcushion if possible.Remove any additional material from the seat such asblankets, cushions, seat covers, seat heaters orseat massagers before reinstalling or securing thechild restraint.If the on indicator is still lit, do not install a child restraintin this vehicle and check with your dealer/retailer.To remove the child restraint, unbuckle the vehicle’ssafety belt and let it go back all the way.1-35
