Black plate (43,1)Cadillac CTS/CTS-V Owner Manual (Include Mex) - 2012Seats and Restraints 3-43Depending on where you place thechild restraint and the size of thechild restraint, you may not be ableto access adjacent safety beltassemblies or LATCH anchors foradditional passengers or childrestraints. Adjacent seatingpositions should not be used if thechild restraint prevents access to orinterferes with the routing of thesafety belt.Wherever a child restraint isinstalled, be sure to secure thechild restraint properly.Keep in mind that an unsecuredchild restraint can move around in acollision or sudden stop and injurepeople in the vehicle. Be sure toproperly secure any child restraint inthe vehicle — even when no childis in it.Lower Anchors andTethers for Children(LATCH System)The LATCH system holds a childrestraint during driving or in a crash.This system is designed to makeinstallation of a child restraint easier.The LATCH system uses anchors inthe vehicle and attachments on thechild restraint that are made for usewith the LATCH system.Make sure that a LATCH-compatiblechild restraint is properly installedusing the anchors, or use thevehicle's safety belts to secure therestraint, following the instructionsthat came with that restraint, andalso the instructions in this manual.When installing a child restraint witha top tether, you must also useeither the lower anchors or thesafety belts to properly secure thechild restraint. A child restraint mustnever be installed using only the toptether and anchor.In order to use the LATCH systemin your vehicle, you need a childrestraint that has LATCHattachments. The child restraintmanufacturer will provide you withinstructions on how to use thechild restraint and its attachments.The following explains how toattach a child restraint with theseattachments in your vehicle.Not all vehicle seating positions orchild restraints have lower anchorsand attachments or top tetheranchors and attachments.