Black plate (8,1)Cadillac CTS/CTS-V Owner Manual (Include Mex) - 20123-8 Seats and RestraintsMemory SeatsOn vehicles with the memoryfeature, memory buttons 1 and 2 onthe driver door are used to save andrecall memory settings for the driverseat cushion and seatback, outsidemirrors, and the steering columnposition, if the vehicle is equippedwith the power tilt and telescopicsteering column.1: Saves and recalls for driver 1.2: Saves and recalls for driver 2.B (Exit Button): Moves the driverseat and/or power steering columnto the exit position. See “Exit Recall”later in this section.Storing Memory PositionsTo save into memory:1. Adjust the driver seat, outsidemirrors, and the power steeringcolumn, if equipped, to thedesired driving positions.2. Press and hold “1” untiltwo beeps sound.3. Repeat for a second driverusing “2.”The vehicle comes with two RemoteKeyless Entry (RKE) transmitters.Each transmitter has a number“1” or “2” on it. These numberscorrespond to “1” and “2” on thedriver door. The current driver isidentified when K on the RKEtransmitter is pressed, or when“1” or “2” on the driver door ispressed.To recall memory positions, pressand release “1” or “2.” The vehiclemust be in P (Park) for an automatictransmission, or the parking brakemust be applied for a manualtransmission. A single beep willsound when the button is pressed.The seat, outside mirrors, and/orpower steering column will move tothe position previously stored for theidentified driver.Automatic Entry RecallIf entry/exit recall is programmedon in the vehicle personalizationmenu, automatic entry recall occurswhen the ignition is turned on.See Vehicle Personalization onpage 548.To stop recall movement,press one of the power seat,memory, or outside mirror buttons,or the power steering columnswitch, if equipped.If something has blocked thedriver seat or the steering columnwhile recalling a memory position,the recall may stop. Remove theobstruction; then press the