Instruments and Controls 4-51“Learn” or “Smart” Buttons4. After Steps 1 through 3 havebeen completed, locate the“Learn” or “Smart” button insidethe garage on the garage dooropener receiver (motor-headunit). The name and color ofthe button may vary bymanufacturer.5. Firmly press and release the“Learn” or “Smart” button. Afteryou press this button, you willhave 30 seconds to completeStep 6.6. Immediately return to thevehicle. Firmly press and holdfor two seconds the UniversalHome Remote button, selectedin Step 2 to control the garagedoor, and then release it. If thegarage door does not move orthe lamp on the garage dooropener receiver (motor-headunit) does not flash, pressand hold the same button asecond time for two seconds,and then release it. Again, ifthe door does not move orthe garage door lamp doesnot flash, press and hold thesame button a third time fortwo seconds, and then release.The Universal Home Remote shouldnow activate the garage door.To program the remainingtwo Universal Home Remotebuttons, begin with Step 1 of“Programming the UniversalHome Remote System”.Gate Operator and CanadianProgrammingIf you have questions or needhelp programming the UniversalHome Remote System,call 1‐800‐355‐3515 or go towww.homelink.com.Canadian radio-frequency lawsrequire transmitter signals to timeout or quit after several secondsof transmission. This may not belong enough for Universal HomeRemote to pick up the signal duringprogramming. Similarly, some U.S.gate operators are manufactured totime out in the same manner.
