6-52 Infotainment SystemBluetooth(Voice Recognition)PairingA Bluetooth cell phone must bepaired to the Bluetooth systemand then connected to the vehiclebefore it can be used. See the cellphone manufacturers user guide forBluetooth functions before pairingthe cell phone. If a Bluetooth phoneis not connected, calls will be madeusing OnStar ® Hands‐Free Calling,if available. Refer to the OnStarOwner's Guide for more information.The pairing process can be startedby using the voice recognitionsystem or the controls on theinfotainment system.A Bluetooth phone with MP3capability can not be paired to thevehicle as a phone and an MP3player at the same time.Pairing Information:. Up to five cell phones can bepaired to the Bluetooth system.. The pairing process is disabledwhen the vehicle is moving.. The Bluetooth system links withthe first available paired cellphone based on the ordershown in the device list.. Only one paired cell phone canbe connected to the Bluetoothsystem at a time.. Pairing only needs to becompleted once, unless thepairing information changes orthe phone is deleted.To link to a different paired phone,see Linking to a Different Phonelater in this section.Pairing a Phone1. Press b / g.. For vehicles without anavigation system, thesystem responds “Ready”followed by a tone.. For vehicles with anavigation system, thesystem responds with atone. After the tone say“Hands Free”. The systemresponds “Ready” followedby a tone.2. Say “Bluetooth”. The systemresponds “Bluetooth ready”followed by a tone.3. Say “Pair”. The system respondswith instructions and a four‐digitPIN number. The PIN numberwill be used in Step 4.
