Infotainment System 6-39Changing the Source on the VideoDisplay ScreensThe image from the auxiliary devicecan be switched between the videodisplay screens.To change the display:1. Press the AUX button on theremote control to change thesource of both video screensfrom the DVD player to theauxiliary device.2. Press the AUX button asecond time to change theleft video screen source to theDVD player and the right videoscreen to the auxiliary device.3. Press the AUX button athird time to change the leftvideo screen source to theauxiliary device and the rightvideo screen to the DVD player.4. Press the AUX button afourth time to change thesource of both video screensto the DVD player.How to Change the RSE VideoScreen SettingsThe screen display mode,brightness, and language canbe changed from the setup menuusing the remote control. To changea setting:1. Press z .2. Use n , q , p , o andr select the settings.3. Press z again to exit thesetup menu.Audio OutputAudio from the DVD player orauxiliary inputs can be heardthrough the following:. Wireless Headphones. Vehicle Speakers. Vehicle wired headphone jackson the rear seat audio system,if the vehicle has this feature.The RSE system transmits theaudio signal to the wirelessheadphones if an audio signal isavailable. See “Headphones” earlierin this section for more information.Audio can be heard from the wiredheadphone jacks on the RSAsystem by selecting the desiredsource from the RSA system, if thevehicle has this feature.The front seat passengers are ableto listen to playback from the A/Vjacks through the vehicle speakersby selecting Rear A/V as the sourceon the radio.
