Chapter 33-683.3.1.8 Removing the NCUBoard 0006-30271) Remove the two connectors [1] and the flat cable[2].2) Remove the two screws [3] and remove the NCUboard [4].F-3-2943.3.1.9 Removing the NCUCase 0006-30251) Remove the three screws [1]; then, pull the upperportion of the NCU case [2] toward you, and liftingit upward, remove the NUC case.F-3-2953.3.1.10 Removing the ScannerUnit 0006-30261) Remove the screw [1] and remove the connector [2]as well as the flat cable [3] on the DCNT board.Remove the tape holding the cable in advance.Prepare a new tape (Part No: AZ7-0008) of a suitablelength before you attach the cable again.F-3-2962) Remove the two front screws [1].F-3-297[1][2][4][3][1][2][2] [1][3][1]
