Chapter 33-873.5.5.8 Removing the NCUBoard and Modular Board 0006-36861) Remove the two connectors [1] and the flat cable[2].2) Remove the four screws [3] and remove the NCUboard [4] and modular board [5].F-3-3753.5.5.9 Removing the NCUCase 0006-36921) Remove the three screws [1]; then, pull the upperportion of the NCU case [2] toward you, and liftingit upward, remove the NUC case.F-3-3763.5.5.10 Removing the RightFront Cover 0002-71361) Remove the two screws [1] and then removes theright front cover [2].F-3-3773.5.5.11 Removing the GearUnit 0005-42181) Remove the 2 screws [1], and detach the drive plate(small) [2].F-3-3782) Remove the 2 gears [1].3) While freeing the claw, detach the gear unit [2].F-3-379[1][4][3][3][2][5][3][1][2][1][2][2][1][2][1]
