Chapter 33-283.1.15.9 Removing the PowerSupply Shield plate 0002-75261) Remove the five screws [1] to remove the powersupply shield plate [2].F-3-1163.1.15.10 Removing the PowerSupply Assembly 0005-99261) Remove the connector [1] and remove the cablefrom the cable guide.F-3-1172) Remove the three screws [1]. (The external cover isomitted from the illustration below to show theinstructions clearly.)3) Remove the four connectors [2] as well as the flatcable [3] on the DCNT board.F-3-1184) As you remove the bosses on both sides [1], lowerthe front part of the power supply assembly [2].Then pull it to remove the power supply assembly.F-3-1193.1.15.11 Removing the High-Voltage Power Supply Board 0005-99271) Remove the flat cable [1].2) Remove the three screws [2] and the high-voltagepower supply board [3].F-3-120[1][2][1][1] [2][2][1][3][1][2][3][2][1]
