Chapter 33-203.1.11.10 Removing the DCNTBoard 0005-99581) Take off the connectors at seven spots (six if theunit is not equipped with the fax function) [1] aswell as the flat cable at three spots [2].2) Remove the three screws [3] and, while carefullywatching the sensor flag, removes the DCNT board[4].F-3-823.1.12 NCU Board3.1.12.1 Removing the Cassette 0006-29691) Remove the cassette by holding the cassette handle.3.1.12.2 Removing the ReaderLeft Front Cover 0006-29711) Open the platen glass cover [1].2) Open the front cover [2] and the ADF part [3],remove one screw [4], and remove the reader leftfront cover [5].F-3-833.1.12.3 Removing the LeftCover 0006-29721) Remove the two screws [1] on the back side.F-3-842) Remove the front screw [1] and then remove theclaw [2].3) Slightly lift up the left side of the unit and removethe cover as if you were opening the bottom side ofthe left cover [3].F-3-85[1][1][2][2][3][3][3][4][1][5][4][3][2][1][1][3][2]
