Chapter 55-10CauseThe other party's communication mode (G2, G3, etc.) does not match.RemedyThe communication mode depends on each specific model, and no remedy can be offered.CauseDuring transmission, the other party malfunctioned because of an echo.Remedy1) Using a manual call, press the Start button after hearing the 1st DIS from the other party.2) To prevent response to the 1st DIS from the other party, put a relatively long pause to the telephone number whenregistering an auto-dial number.3) Ask the operator of the other party to provide echo remedy 2.4) Ask the operator of the other party to decrease the transmission level.CauseDuring reception, the machine malfunctioned because of an echo.RemedyProvide echo remedy 2.MemoEcho Remedy 2 (by the receiving machine; adds a 1080-Hz total signal before transmission of CED)Set SW03 bit 7 of service soft switch #1 SSSW to '1' so that a 1080-Hz total signal is transmitted beforetransmission of CED.5.5.2.5 #009 [RX] Recording paper has jammed or the recording paper has run out 0007-2941CauseThe recording paper is trapped.RemedyRemove the trapped recording paper.CauseThe recording paper has run out.RemedySet new recording paper.
