Chapter 33-213.1.12.4 Removing the NCUBoard 0005-97961) Remove the two connectors [1] and the flat cable[2].2) Remove the two screws [3] and remove the NCUboard [4].F-3-863.1.13 Modular Board3.1.13.1 Removing the Cassette 0006-29731) Remove the cassette by holding the cassette handle.3.1.13.2 Removing the ReaderLeft Front Cover 0006-29741) Open the platen glass cover [1].2) Open the front cover [2] and the ADF part [3],remove one screw [4], and remove the reader leftfront cover [5].F-3-873.1.13.3 Removing the LeftCover 0006-29761) Remove the two screws [1] on the back side.F-3-882) Remove the front screw [1] and then remove theclaw [2].3) Slightly lift up the left side of the unit and removethe cover as if you were opening the bottom side ofthe left cover [3].F-3-89[1][2][4][3][1][5][4][3][2][1][1][3][2]
