Chapter 33-773.5.2.12 Removing the PowerSupply Shield Plate 0003-75861) Remove the five screws [1] to remove the powersupply shield plate [2].F-3-3303.5.2.13 Removing the PowerSupply Assembly 0006-36721) Remove the three screws [1]. (The external cover isomitted from the illustration below to show theinstructions clearly.)2) Remove the four connectors [2] as well as the flatcable [3] on the DCNT board.F-3-3313) As you remove the bosses on both sides [1], lowerthe front part of the power supply assembly [2].Then pull it to remove the power supply assembly.F-3-3323.5.2.14 Removing the CassettePickup Solenoid 0006-36731) Place the main unit down on its front face (so thatthe interior of the main unit is easily visible).2) Remove the connector [1] on the DCNT board andtake out the cable from the cable guide.3) Remove the screw [2] to remove the cassette pickupsolenoid [3], which is located behind the mainmotor.F-3-3333.5.3 Cassette Separation Pad3.5.3.1 Removing the Cassette 0002-42961) Remove the cassette by holding the cassette handle.3.5.3.2 Removing the Rear ofthe Cassette 0002-37831) Lift the rear of the cassette, and separate the rearfrom the front.[1][2][1] [2][2][1][3][1][2][1][2][3]
