Canon MultiPASS F50 User Manual

Also see for MultiPASS F50: Reference guide Software user's guide Fax guide Setup instructions Specification

Contents

When done, press to save, then toexit.Switching from Touch Tone toRotary DialingYour F50 MFP is set to operate with a touchtone line. If your line does not support touchtone dialing, you can reset the F50 MFP forrotary dialing. See the online MultiPASS FaxGuide on your CD-ROM for instructions on howto switch from touch tone to rotary dialing.Setting the Fax Receive ModeThere are five possible modes for receivingfaxes:FFAAXX//TTEELL AAUUTTOO SSWW Automatically switchesbetween fax calls and voice calls. Receivesfaxes automatically and rings for voice calls.FFAAXX OONNLLYY MMOODDEE Answers all calls as fax calls,receiving faxes automatically anddisconnecting voice calls.DDRRPPDD Distinctive Ring Pattern Detection allowsthe user to distinguish between incoming voiceand fax calls. See “Setting a Distinctive Ring Pattern” on page 15.MMAANNUUAALL MMOODDEE If a phone is connected to the F50 MFP, the phone will ring everytime a call comes in. You can answer the call, or press SSttaarrtt to receive an incomingfax after lifting the handset. See “Receiving Faxes Manually” on page 24.AANNSS.. MMAACCHHIINNEE MMOODDEE If you have an answering machine connected to the F50MFP, the F50 MFP will receive faxes, and route voice calls to the answeringmachine in this mode.See “How to Fax” starting on page 21 for procedures on receiving and sendingfaxes.MultiPASS F50 User’s Manual11441. RECEIVE MODE2. MEMORY REFERENCE3. REPORTS/LISTS4. TEL REGISTRATION5. FAX SETTINGS6. PRINTER SETTINGS7. SYSTEM SETTINGSANS. MACHINE MODEMANUAL MODEFAX/TEL AUTO SWFAX ONLY MODEDRPD2. SPEED DIAL LIST1. ACTIVITY REPORT3. USER DATA LIST4. DOC. MEMORY LIST1. 1-TOUCH SPD DIAL2. REPORT SETTINGS1. USER SETTINGS3. TX SETTINGS4. RX SETTINGS2. PRINT DOCUMENT1. DOC. MEMORY LIST3. DELETE DOCUMENT4. FILE PRINT2. CODED SPEED DIAL3. GROUP DIALFAX MODE MENUSF50 Chapter 3-33.qxd 6/20/01 5:08 PM Page 14