Sequential BroadcastingWith sequential broadcasting, you can scan a document once and send it tomultiple locations. You can broadcast the same document to up to 113locations, using a combination of One-Touch Speed Dialing (12 locationsmaximum), Coded Speed Dialing (100 locations maximum) and regular redialing(1 additional location).To use sequential broadcasting:1 Load documentInsert the document face up in the ADF tray, or face down on the glass.2 Select FAX MODEPress to access FFAAXX MMOODDEE.3 Enter fax numbersEnter any combination of the following:For One-Touch Speed Dial numbers, press the desired One-Touch SpeedDialing button(s). Repeat as needed.For Coded Speed Dialing numbers, press once, then use the numerickeypad to enter coded fax number. Repeat as needed.For regular dialing, use the numeric keypad to enter the fax number.Press once to save.You must enter the second fax number within five seconds of entering the firstone. All subsequent fax numbers must be entered within 10 seconds.Press to review the numbers entered.4 Send faxWhen all numbers are entered, press to begin sending the fax.If a number is busy, the F50 MFP will continue sending to the other destinations,then redial any numbers that were busy.3377How to FaxF50 Chapter 4-33.qxd 6/20/01 5:11 PM Page 37
