To fax to a group:1 Load documentInsert the document face up in the ADF tray, or face down on the glass.2 Select groupPress the One-Touch Speed Dialing button for the group to which you want tofax,or press on the control panel then enter the code for the GroupDial list on the numeric keypad. The group name will display.Press to begin faxing.Working with Faxes Stored in MemoryPrinting and Deleting Documents in MemoryThe F50 MFP can store up to 30 document transactions or 270* pages inmemory. If there are no documents stored in memory when MMeemmoorryy RReeffeerreenncceeis accessed, then the F50 MFP will return to standby mode.A stored document can be printed for review or deleted from memory.A document is stored in memory when:• The document is scanned for memory-sending or delayed-sending, and hasnot yet been sent.• The document is scanned for sequential sending.• The MultiPASS Toolbar has been set to automatically upload faxes to the PCand a fax comes in when the PC is off. In this case, the fax will stay in theF50 MFP’s memory until the PC is turned on again. The fax will thenautomatically upload to the PC and be deleted from memory.• A fax is received when the F50 MFP is being used for other tasks, or cannotprint due to an error (such as paper not loaded). Once the F50 MFP is againable to print, pressing the RESUME button will automatically print thereceived fax then delete it from memory.When memory is full, the operations described above cannot be performed.MultiPASS F50 User’s Manual3322* Based on ITU-T No.1 ChartF50 Chapter 4-33.qxd 6/20/01 5:11 PM Page 32
