Canon MultiPASS F50 User Manual

Also see for MultiPASS F50: Reference guide Software user's guide Fax guide Setup instructions Specification

Contents

8811TroubleshootingMEMORY USED--nn%Shows percentageof memory usedIf you need more memory, wait for the machine to finish sendingcurrent faxes. Also, print or delete any documents in memory thatyou no longer need. See "Printing and Deleting Documents inMemory" on page 32.NO RX PAPER(#012)Recipients fax outof paper or memoryis fullContact the receiving party and have them load paper in their faxmachine or free up space in their fax memory.NO TEL # (#22) No phone number Use regular dialing, or use a one-touch speed dial button or codedspeed dial code. See "One-Touch Speed Dialing" on page 25, or"Coded Speed Dialing" on page 27.NOT AVAILABLE A group speed-dialing numberwas manuallyenteredUse regular dialing, or enter a one-touch speed dialing button orcoded speed dialing code that only has one number assigned to it.PUT IN CARTRIDGE Printhead notinstalledInstall the printhead.REC D IN MEMORY Fax received andstored in memoryA received fax is stored in memory when the F50 MFP is busy withother tasks, or the F50 MFP could not print due to an error such asno paper or ink. If the F50 MFP was busy, the fax prints when othertasks are finished. If necessary, clear the paper jam, load paper inthe multi-purpose tray or replace the empty ink tank.RECEIVED IN FILE Fax received inmemoryUpload the document to your PC, or print the document. See"Printing and Deleting Documents in Memory" on page 32.MultiPASS StatusMonitor is notrunningWindows 95/98/MeWindows 95/98/MeWindows 95/98/MeWindows 95/98/Me: Start the MultiPASS Status Monitor. On theWindows desktop, click StartStartStartStart, then ProgramsProgramsProgramsPrograms. In the ProgramsProgramsProgramsProgramsmenu, click on MultiPASS SuiteMultiPASS SuiteMultiPASS SuiteMultiPASS Suite, then MultiPASS StatusMultiPASS StatusMultiPASS StatusMultiPASS StatusMonitorMonitorMonitorMonitor.TRY AGAIN IN B&W(#085)Color fax was sentto B&W machineTry sending again in B&W. If you send a color document to a faxmachine that does not support color faxing, the document will notbe sent and the LCD will display TRY AGAIN IN B&W. Send the faxagain in black & white.Alternatively, you can enable the COLOR DIRECT TX setting thatallows you to send color documents to any fax machine.To enable COLOR DIRECT TX:1. Press MenuMenuMenuMenu, then <+ -><+ -><+ -><+ -> until FAX SETTINGSFAX SETTINGSFAX SETTINGSFAX SETTINGS appears. Press SetSetSetSet.2. Press <+ -><+ -><+ -><+ -> until TX SETTINGSTX SETTINGSTX SETTINGSTX SETTINGS appears. Press SetSetSetSet.3. Press <+ -><+ -><+ -><+ -> until COLOR DIRECT TXCOLOR DIRECT TXCOLOR DIRECT TXCOLOR DIRECT TX appears. Press SetSetSetSet.4. Press <+ -><+ -><+ -><+ -> to set COLOR DIRECT TXCOLOR DIRECT TXCOLOR DIRECT TXCOLOR DIRECT TX to ONONONON. Press SetSetSetSet.TX/RX CANCELED Stop/ResetStop/ResetStop/ResetStop/Reset waspressedTry sending again.MessageMessageMessageMessage Possible CausePossible CausePossible CausePossible Cause Try ThisTry ThisTry ThisTry ThisF50 Chapter 9-33.qxd 6/20/01 5:19 PM Page 81