Canon TA-30 Online Manual

Also see for imagePROGRAF TA-30: Quick guide Setup guide

◦ Enable/disable Wi-FiSelect Enable to wirelessly connect via wireless router.◦ Wi-Fi setupSelect how to setup Wi-Fi.■ Easy wireless connectSelect if you specify the settings of the access point information to the printer directly from adevice (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screeninstructions of the connecting device for the setup procedure.■ Manual connectSelect when you perform settings for Wi-Fi manually using the operation panel of the printer.■ WPS (Push button method)Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi ProtectedSetup (WPS) push button method. Follow the on-screen instructions during setup.■ Other connection types■ Manual connect (adv.)Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys.■ WPS (PIN code method)Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-FiProtected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.Note• By tapping Advanced, you can set LAN in detail.For the items that can be set, see the following.Advanced• Wireless DirectThe following setting information on the Wireless Direct connection is displayed. (Some items are notdisplayed depending on printer settings.)Items SettingConnection Enabled (connected) / Enabled (disconnected) / Disa-bleNetwork (SSID)/device name DIRECT-XXXX-TA-30Password XXXXXXXXXX (10 characters)Communication mode Wireless DirectChannel 3Wi-Fi security WPA2-PSK (AES)IPv4 address XXX. XXX. XXX. XXX (12 characters)IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters)152