After the Information dialog is displayed, under Roll Width, select the same paper width as that of thepaper roll loaded in the printer and click OK.5. Select a method for printing borderlessSelect Fit Paper Size in Borderless Printing Method.If the size of the document is different from the size of the paper you want to print on, select the papersize you want to print on from Printer Paper Size.6. Complete the setting processClick OK.If you print now, the document will be printed without margins to fit the paper size.Important• If you place a checkmark next to the Borderless Printing option, the Page Layout and Print Centeredoptions in the Layout tab will be displayed in gray out and you will not be able to configure them.• Depending on paper size, the length/width ratio of the paper may be different from that of the image,making it impossible for the whole image to fit on the paper.When this happens, crop the image with the application software to match paper size.• When printing borderless, printing may stop abruptly and the paper will be cut causing a slight colorunevenness on the edges of the paper. If you require exceptionally high quality, in the Roll PaperOptions dialog box select No from the Automatic Cutting list. When you do so, the document will beprinted without the left and right margins. After the printed material has exited the printer and has beencut, cut the upper and lower edges with a pair of scissors.• When printing borderless on paper with low ink-fixing properties, depending on frequency of use, thecutter unit may come into contact with the paper surface scratching it and causing the paper to beunevenly cut.You may be able to improve the situation by clicking Specify... on the Main tab and, in the PaperDetailed Settings dialog box, under Drying Time, set Between Pages to a higher value.• Margins may be formed on the left and right of the document even when borderless printing is set.Also, stains may appear on the back of the paper.551