Canon TA-30 Online Manual

Also see for imagePROGRAF TA-30: Quick guide Setup guide

Setting Mail ServerTo use mail function, specify the mail server settings.*This function may not be available depending on the country or region of purchase.Note• If you did not specify the time zone setting using the printer's operation panel, a message to inform youthat the correct time may not be reflected on the sent e-mail appears. We recommended that you setthe time zone setting using the printer's operation panel.For the time zone setting, see Other device settings.• These functions can be set only when you are logged in administrator mode.1. Start up Remote UI.2. Select Device settings.3. Select Set mail server.The setting items for mail server appear.4. Specify mail server settings.Specify the following items.Sender addressEnter the e-mail address of the sender (this printer).Outgoing mail server (SMTP)Enter the address of your SMTP server.Port number (SMTP)Enter the port number of your SMTP server.Secure connection (SSL)Select if you use the secure connection (SSL).Don't verify certificatesSelect if you do not verify the certificate.Authentication methodSelect one of the following authentication methods.SMTP authenticationSelect if you send e-mail with SMTP authentication.Then select OK, and then make the following settings.Outgoing accountEnter the account name for sending to perform the authentication.Outgoing passwordTo set / change the password for sending in order to perform the authentication, check theSet/change password and then enter the password.246