Canon TA-30 Online Manual

Also see for imagePROGRAF TA-30: Quick guide Setup guide

◦ When printing during hours other than those set in Available from and To in the Advanced tab inthe printer's Properties◦ When printing with the Enable advanced printing features turned off in the Advanced tab in theprinter's Properties◦ When printing with Print directly to the printer enabled in the Advanced tab in printer'sProperties◦ When printing after the printing port in the Ports tab in the printer's Properties has changed toFILE:◦ When printing after choosing Output to file in the Print dialog box in the application software• If you perform a point-and-print installation, you will not be able to use the Free Layout and the EditUsing PosterArtist features of Page Layout in the Layout tab as well as the CanonimagePROGRAF Preview feature.• If you print after setting Free Layout and Edit Using PosterArtist, refrain from printing from otherdrivers.• If you combine specific Print Quality with large paper sizes, you may not be able to correctly printstamps and borders.• In the Canon imagePROGRAF Preview, characters and fine lines visualized in the View screen maylook differ from printed results. In such cases, try choosing the Layout tab, opening the SpecialSettings dialog and turning on Preview Switching.Points to Note About Applications with Restrictions• If, in Microsoft Excel, you tick Collate and then you print more than one copy, or if you do Entireworkbook after configuring different settings in each tab, you may not be able to perform layoutprinting nor to get the intended printing results.• If you try to print data on a very large-size paper through applications like Adobe Illustrator, you maynot be able to print.In such cases, try printing after following the procedure indicated below.◦ Open the Main tab and uncheck Preview before printing.◦ If you are using a 32-bit driver, open the Layout tab and click Special Settings.Turn off Fast Graphic Process.◦ Increase the virtual memory of your operating system.◦ If you are using Adobe Illustrator, turn off/on Bitmap printing in the Print dialog box.• In the cases described below, you will not be able to use the Free Layout and the Edit UsingPosterArtist features of Page Layout in the Layout tab.◦ When printing from application software which do not allow EMF spooling, like Adobe PhotoshopLE, MS Photo Editor, Ace Draw and others.• When printing from Adobe Photoshop, tone jumps may occur in the gradation of black and whitephotographs.• When printing data created with Microsoft Word using Enlarged/Reduced Printing or BorderlessPrinting, you may not be able to print correctly.In such cases, try printing after following the procedure indicated below.◦ Open the printer folder from the start menu, right click on the printer icon and select Printingpreferences. Launch the application after setting, in the Page Setup tab, Page Size, Enlarged/Reduced Printing and Borderless Printing.◦ Open Microsoft Word's Page setup dialog box and close it by clicking OK.618