Canon TA-30 Online Manual

Also see for imagePROGRAF TA-30: Quick guide Setup guide

Network Status and TroubleshootingCheck the network status referring to LAN setting information on the touch screen.Confirm LAN settingsNetwork Status What to DoConnected normal-ly.If you are unable toprint, see 1 on Whatto Do.1. If you are unable to print, check the items below:• whether the computer is connected to Wi-Fi• whether the firewall of your security software is enabled• whether a privacy separator, SSID separator, or Network separation function is enabledon your wireless routerIf one of the above is enabled, disable it before setup.• whether the SSID of the printer (see "3-2-6" of network setting information printout)matches that of the router to connect2. To change the network connection method (wired/wireless), change it on the printer's net-work setting screen.LAN is disabled onthe printer.Perform printer setup following the instructions of the manual.Wired LAN connec-tion is disabled.• Make sure the printer is connected to the router with the LAN cable.If the LAN cable is loose, connect the cable properly.If the LAN cable is connected to the WAN side of the router, connect the cable to the LANside of the router.• Make sure the network devices (e.g. hub or router) are turned on.IP address is notassigned.• If you specify the printer's IP address automatically, enable DHCP on the router.• If you specify the printer's IP address manually, the address is disabled because it is out ofthe valid range. You specified (0.0.0.0) as the IP address, for example.Specify the valid IP address.The default gate-way is not specified.Check the items below to communicate by hopping routers (e.g. using a cloud application).• If you specify the printer's IP address manually, make sure the correct default gateway ad-dress is specified for the printer manually.• Make sure the device specified as the default gateway is turned on.• Specify the default gateway address correctly.To check the default gateway, print out the network settings information.Note• For some printers, you can check the default gateway on the operation panel.Cannot connect tothe specified net-work.Check the status of the printer, network devices (e.g. wireless router), or smartphone/tablet.• If they are turned off, turn them on.• Make sure wireless signal is strong.Monitor signal status and move the printer and wireless router as necessary.• The security key specified for the wireless router may not match that you entered.295