Canon TA-30 Online Manual

Also see for imagePROGRAF TA-30: Quick guide Setup guide

Lines or colors are misalignedCheck 1 Adjust the position of the Print headIf borders are misaligned or the print results are not uniform, adjust the position of the Print head.Adjusting the Print HeadFor detailed printing of small text or fine lines on glossy or semi-gloss photo paper or proof paper, etc., set thePrint head to the optimal height and then adjust the position of the Print head.Changing the Print Quality and Correcting Image Data (Windows)Changing the Print Quality and Correcting Image Data (macOS)Note• Setting a lower value for Paper Thickness (Head Height) in the touch screen menu may resolve theproblem.Troubleshooting Paper Abrasion and Blurry ImagesCheck 2 Is the media type specified in the printer driver the same as the media typeloaded in the printer?Load the printer with the media type specified in the printer driver.Loading Rolls in the PrinterLoading Sheets in the PrinterFollow the steps below to match the media type in the printer driver to the media type loaded in the printer.1. To stop printing, press the Stop button.2. Reset the media type in the printer driver, and then print.Check 3 Perform Print head angle alignment.Select Print head angle adjustment in the touch screen menu to align the Print head angle.Adjusting Line MisalignmentImportant• Changing the release lever position while printing is in progress causes paper jam, misaligned lines, orwrong colors. Be careful not to touch the release lever while printing in progress.732