Canon TA-30 Online Manual

Also see for imagePROGRAF TA-30: Quick guide Setup guide

Printing From a Desired Starting PointPrint on sheets from a desired starting point as follows.Setting Detect paper width to Disable1. Tap paper settings display area on Home screen of operation panel.Note• If the Home screen does not appear, press the HOME button.2. Tap Paper settings.3. Tap Advanced.4. Select Detect paper width and tap Disable.Load paper in the desired position to start printing fromFollow these instructions to load paper at the desired starting position for printing when Detect paperwidth is set to Disable.1. If you did not send a print job in advance, a menu for selection of the type of paper isdisplayed.Tap media type loaded.Note• If a print job was received before the paper was fed, the media type and size specified by thejob are shown on the operation panel.Go to step 2.2. When "[Detect paper width] is disabled. Do you want to keep it disabled andcontinue?" appears on operation panel, tap Keep it disabled and continue.97