Canon TA-30 Online Manual

Also see for imagePROGRAF TA-30: Quick guide Setup guide

Image edges are blurred or white banding occursCheck 1 Paper may be gripped too strongly over the platen.Set a lower Transport unit vacuum strength in the touch screen menu.Adjusting Vacuum StrengthCheck 2 Check if the Print head is in the right position.For detailed printing of small text or fine lines on glossy or semi-gloss photo paper or proof paper, etc., set thePrint head to the optimal height and then adjust the position of the Print head.Adjusting the Print HeadSetting a lower value for Paper Thickness (Head Height) in the touch screen menu may resolve the problem.Troubleshooting Paper Abrasion and Blurry ImagesCheck 3 Is the media type specified in the printer driver the same as the media typeloaded in the printer?Load the printer with the media type specified in the printer driver.Loading Rolls in the PrinterLoading Sheets in the PrinterFollow the steps below to match the media type in the printer driver to the media type loaded in the printer.1. To stop printing, press the Stop button.2. Reset the media type in the printer driver, and then print.726