Canon TA-30 Online Manual

Also see for imagePROGRAF TA-30: Quick guide Setup guide

Note• For how to remove the roll holder, see "Removing the Roll from the Printer."2. Select sheets as the paper source.• If a print job was receivedSheets are automatically selected, and the media type and size specified by the print job areshown on the operation panel.Tap OK and Load paper.• If no print job was received1. Tap Load paper or Replace paper.2. Tap Load cut sheet or Replace cut sheet.Note• If the Home screen does not appear, press the HOME button.Note• If any paper has been advanced that will not be used, a message is shown requesting you toremove it.Follow the instructions on the screen to remove the paper, and redo the operation.3. Use the paper alignment line to align and load the sheets.With its print side up, load a sheet in the paper feed slot, with the right edge aligned with the paperalignment line's white line (A), and then insert the sheet into the paper slot.Insert the paper until the leading edge makes contact.An alarm sounds when the paper is inserted into the paper feed position.95