Canon TA-30 Online Manual

Also see for imagePROGRAF TA-30: Quick guide Setup guide

Setting Up a Shared PrinterOn the print server, set up sharing of the printer driver. Then from the client, set up the connection to theprint server.1. Install the printer driver on the print server system2. Display the Devices and Printers windowSelect the Control Panel -> Hardware and Sound (Hardware) -> Devices and Printers.The Devices and Printers window is displayed.3. Click the icon for the model name of printer to be sharedPress the Alt key, and from the displayed File menu, select Printer properties -> Sharing tab.Important• When starting up the software and performing install or uninstall, a confirmation or warning dialogbox may appear.This dialog box appears when administrative rights are required to perform a task.When you are logged on to an administrator account, click Yes (or Continue, Allow) to continue.Some applications require an administrator account to continue. In such cases, switch to anadministrator account, and restart the operation from the beginning.4. Set sharingOn the Sharing tab, check (or select) Share this printer, set the shared name as necessary, and thenclick OK.5. If the print server and the client have different architectures (32 bit or 64 bit), install anadditional driver1. Display the Devices and Printers, Printers, or Printers and Faxes window.2. Select the printer icon, click Print server properties, and select the Drivers tab.3. Click Add....4. When the Add Printer Driver Wizard window is displayed, click Next.5. If the print server has a 32-bit architecture, select x64. If the print server has a 64-bitarchitecture, select x86. Then click Next.6. Click Have Disk....7. In the Install From Disk window, open the "Driver" folder of the downloaded printer driver,specify the "inf" file, and click OK.352