Canon VB-H43 Operation Manual

Also see for VB-H43: Operation guide Installation guide

Contents

118 Intelligent Function SettingsWhen you click [Add] in the [Detection Setting List],the [New Detection Settings] dialog box is displayed.Set the [Detection Setting Number] and [DetectionType] of the detection setting you want to add, andthen click [OK].Up to 15 different detection settings can beregistered.(1) [Detection Setting Number]Specify a detection setting number from 1 to 15 for thedetection area you want to set.(2) [Detection Type]Select detection types that suit your purpose from[Moving Object Detection], [Abandoned ObjectDetection], [Removed Object Detection], [CameraTampering Detection], or [Passing Detection]. Fordetails on detection types, see p. 113.To enable detection settings, select [Enable thesedetection settings].Clear this checkbox to disable a setting.Set detection criteria while operating the camera andchecking the image in the video display area.Set e-mail notification, video record, and audioplayback to be performed upon detection.Click [Save settings] to save the settings in thecamera.You can check the detection status of the specifieddetection settings in the event display panel (p. 158).1 Add detection settings.2 Enable Detection Settings.3 Set detection criteria ([Detection Criteria] tab p. 119).4 Set operations to be performed when a change in asubject is detected ([Event] tab p. 120).5 Save the detection settings in the camera.6 Check the detection result.(1)(2)ImportantNotes on intelligent function settings and operation• When setting intelligent function, do an actual detection testto confirm that detection will be performed correctly.• When the entire screen are exposed to sudden changes inbrightness, detection may not be performed as intended forup to 5 minutes.• If the display switches between Day mode and Night mode,[Restarting intelligent function. Please wait.] is shown andintelligent function will restart. Detection will not be performedwhile intelligent function is restarting.• If the camera is operated during intelligent function setting oroperation, [Restarting intelligent function. Please wait.] isshown and intelligent function will restart. Detection will notbe performed while intelligent function is restarting.• If [Video] > [Video Size Set] on the Setting page is changed,be sure to change the preset position setting (VB-H43/VB-M42 only) and intelligent function settings, and check theoperation. The intelligent function may not operate,depending on the settings.• Set intelligent function again if the angle of view is changedthrough camera operation, or the camera position of a presetor home position is changed using Preset Setting Tool.• If [Status] in [Detection Setting List] is [Enabled] when thecamera position is fixed, control privileges cannot beobtained by VB Viewer or RM Viewer. Also, the preset tourand auto control of custom settings will no longer run.• When using presets registered in digital zoom range, theregistered camera positions may not be reproduced withhigh accuracy. It is recommended that you use presetsregistered in the optical zoom range for the IntelligentFunction.Difficult-to-detect Subjects• Objects or portions where there is little contrast in color orbrightness with the background may not be detected.• Small objects and changes on the screen may not bedetected.• Partial or entire changes in light on the screen may triggerdetection.• If multiple objects overlap, the detection status may change.In particular, passing may not be detected or may bedetected at the wrong timing.