54Current Date and Time[Date], [Time]The date and time currently set in the camera areshown.Setting(1) [Setting Method]Select from [Set manually], [Synchronize with NTPserver], [Synchronize with NTP broadcast],[Synchronize with computer time].(2) [Date], [Time]Set the following according to the selection made in[Setting Method].[Set manually]Set the desired date and time. The date is set by month/day>, and the time in 24-hour format in theorder .[Synchronize with NTP server]The camera will synchronize with the NTP servertime.[Synchronize with NTP broadcast]The camera will synchronize with the NTP servertime. The camera will synchronize time with NTPbroadcasts received from the NTP server.[Synchronize with computer time]The camera will synchronize with the date and timeof the computer currently accessing the camera.The [Time Zone] is not selected automatically, andmust be set separately as required.(3) [Auto-Setting of NTP Server]When [Setting Method] is set to [Synchronize with NTPserver], select a DHCP option for the automatic settingmethod of the NTP server.[Disable]Select when specifying an arbitrary NTP server.Enter the IP address or host name of the NTP serverused in [NTP Server].[Use DHCP]The camera time is synchronized with the time of theNTP server at the address acquired from the DHCPserver. In order to set [Use DHCP], you mustchange [Network] > [IPv4 Address Setting Method]to [Auto (DHCP)] (p. 50).The NTP server address acquired from the DHCPserver will appear in [NTP Server (DHCP)].[Use DHCPv6]The camera time is synchronized with the time of theNTP server at the address acquired from theDHCPv6 server. In order to set [Use DHCPv6], youmust change [Network] > [IPv6] to [Enable], then set[Auto (DHCPv6)] to [Enable] (p. 51).The NTP server address acquired from the DHCPv6server will appear in [NTP Server (DHCPv6)].[Use DHCP/DHCPv6]The camera time is synchronized with the time of theNTP server at the address acquired from the DHCPserver or DHCPv6 server. If the NTP server(address) can be acquired from both the DHCPserver (IPv4) and DHCPv6 server, the NTP serveraddress acquired from the DHCP server (IPv4) willbe used.(4) [Time Zone]Select from the list the appropriate time differencefrom the Greenwich Mean Time.[Date and Time] Setting Date and TimeThe following can be set here.• Current Date and TimeThe date and time set in the camera is shown.• SettingSelect the date and time setting method, timezone and daylight saving time for the camera.
